Windows Live Mail Error 0X800C013E After Update 2004 Solved


This problem appears because of a corrupt boot sequence or when your boot order priority is not configured properly. You are going to experience this problem at random intervals. If you discover that Windows 10 Safe Mode isn’t working, there are a few simple ways to get it to work again.

  • Microsoft lists October 14, 2025 as the retirement date for Windows 10 Home and Pro .
  • If one of those is damaged, corrupt, or has incorrect settings, the system may fail to boot.
  • The error messages, alerts, warnings, and symptoms below are tied to this error.

By default, Flutter uses the version of the Android SDK where your adbtool is based. If you want Flutter to use a different installation of the Android SDK, you must set the ANDROID_SDK_ROOT environment variable to that installation directory. If Git for Windows is already installed, make sure you can run git commands from the command prompt or PowerShell. Type SFC /scannow into the command prompt window and press Enter.

How to Make Your Screen Stay on Longer via Windows 11…

Your system might still crash even without the WHEA-Logger error. What I would do is to confirm that your CPU is indeed running at stock, which means check if your CPU runs at higher than 4.3 all core. Then check voltage with XTU to make sure it is supplying the right voltage, just because it is auto doesn’t mean it is doing a good job. Clean reinstall of Windows with no retained settings. Fortunately for me, it logged the specific memory slot so I was able to replace that module, and it’s been fine ever since.

The Master Boot Record is a section of the hard drive that is used by the PC to start the Windows operating system. If the MBR is corrupt, the PC will not start. The Windows Operating System Disc provided with your HP notebook PC can be used to repair the Master Boot Record . Follow the steps below carefully to repair the MBR. Many PC problems are related to soft failures on the hard drive.

Source of SMTP_552_STORAGE_OVERFLOW Errors

The weird part is if I booted into bios and exited without saving any changes, the PC booted fine. What I found in my situation was that the RAM was causing this. I would replace the RAM and the error would magically disappear. Rebooted the pc, by holding down the power button and when it came back the error had reappeared.

Command Line

Later, reconnect the physical disk to the drive, use it, reboot , and pay if your system is still trying to successfully repair the disk. If there is a problem with click this the hard drive, it will be displayed here, otherwise everyone will see that all drives are working normally. An HDD has moving components inside and this makes it a “fragile” device. To perform this, do the same steps as above except in the step 5, select the option ‘Remove everything’.

November 8, 2022

Posted in: 21518